The Juki TL-2200 QVP Mini is the mini-industrial sewer from Juki. Built from an aluminium internal chassis with strong metal body, this machine uses all the original Juki qualities, plus the added benefits of modern technology, like the under bed thread cutter, which will snip off both the top and bobbin thread at the touch of a button, leaving a neatly finished seam. The fully automatic thread cutter can also be operated with the press of the foot control unit. Just like a true industrial factory sewing machine, you have the option to use your foot to cut thread ends and your knee to lift the presser foot — all of these legendary industrial qualities built-in and ready to go!
It will sew a perfect straight stitch no matter how much thicknesses you feed under the metal foot. The feed dogs can be lowered via the easy to access lever, to allow for stippling and free-motion embroidery.
Reverse sewing, again just like many of the industrial machines, is a simple lever just below the stitch length dial. The beauty about this arrangement is for example, if you were to set the stitch length to 2.5 mm and pressed the reverse lever fully, the reverse length would be 2.5 mm. Setting length to 6.0 mm (the longest stitch setting) the reverse would be 6.0 mm. Simple but clever.
It sews at an incredible 1500 stitches-per-minute! Threading is similar to that of a flat-bed industrial machine.
- Telescopic twin spool pins, means large thread cones can be used
- Adjustable presser foot pressure
- Needle up/down button
- Built-in handle
- Full rotary hook unit, just like a flat-bed factory industrial sewing machine
- Sewing light above the needle
1/4″ Freemotion embroidery foot.
1/5″ Freemotion embroidery foot.
1/4″ Quilting Foot.
Open Toe Quilting Foot.
Standard Presser Foot.
Adjustable zipper foot.
1/4″ Compensating presser foot.
Protective sewing machine cover.
Extension table 59 cm x 33 cm with size stabilizing legs.
Combined foot speed controller with thread trimming command foot switch.